http://www.fab-line.com Fab-Line Machinery LLC offers a full line of equipment to serve the fabrication marketplace but specializes in PRESS BRAKES AND SHEARS. Thu, 16 Jul 2009 05:38:27 +0000 http://backend.userland.com/rss092 en Baykal is one of the only press brake manufacturers to use Nastran software. Nastran is a powerful Finite Element Analysis solver with an integrated graphical user interface and model editor which is used to analyze linear and nonlinear stress, dynamics, and heat transfer characteristics of structures and mechanical components. This ... http://www.fab-line.com/2009/07/baykal-press-brakes-vs-the-competition/ FAB-LINE Machinery, the exclusive importer of Baykal Press Brakes for the United States, has finished installing a Baykal APHS 2750 ton press brake which is 40 foot long. This single stand alone large press brake is fully CNC synchronized Y1Y2, has a full color graphic controller, special tooling, and a ... http://www.fab-line.com/2009/05/largest-press-brake-in-america-installed-by-fab-line-machinery/ The new BPS CNC Plasma Cutting System provides high mechanical accuracy and fast and accurate positioning for your plasma cutting requirements.    CAPACITY RANGESTANDARD TABLE SIZES (X-Y in mm) 1500x3000 2000x4000 2000x6000 2500x4000 2500x6000 3000x6000 3000x12000 TECHNICAL DATA High precision plasma cutting technology. High mechanical accuracy to (+,- ) 0.1 mm. Axis positioning speed 30 mt/min. X and Y axis travel on precision linear rail guides. Torch-height ... http://www.fab-line.com/2008/11/new-bps-cnc-plasma-cutting-system/ [caption id="attachment_9" align="aligncenter" width="267" caption="2007 FAB-LINE Dealer Meeting in New Orleans."][/caption]   [caption id="attachment_10" align="aligncenter" width="267" caption="Gerry Nord representing FAB-LINE service group gives a presentation on the EC4 Off Line Programming software."][/caption]   [caption id="attachment_11" align="aligncenter" width="267" caption="FMS Machine Tool Distributors receive the 2007 FAB-LINE dealer of the year award."][/caption] http://www.fab-line.com/2007/11/2007-dealer-meeting/